Epoxy Fillers

Urethane Supply Company has everything needed to repair and refinish plastics. From plastic welders to instant glues to epoxy fillers to paints to primers, you name it. Some of our products that you may be familiar with are: Mini-Weld Airless Plastic Welder, Plastic Magic Adhesion Promoter, PlatiFix plastic repair kit (not to be confused with Plastex plastic repair kit), Bumper and Trim Black (not to be confused with Forever Black), Wax Blaster wax remover, Flex Filler (not to be confused with Duramix), Black Cat primer (not to be confused with Transtar Hydroflex), Insta-Weld adhesives (not to be confused with Crazy Glue or LocTite), Bumper and Cladding Coat, ATV Fender Welder, Kayak and Canoe Welder for Pelican canoes, FiberFlex welding rods, Uni-Weld welding rods, EZ Weld Hot Air Plastic Welder, Steinel hot air plastic welder. We also carry a complete line of plastic welding rods. For example, we manufacture ABS welding rods, Polypropylene welding rods, Polyethylene welding rods, TPO (TEO) plastic welding rods, Polyurethane welding rods. In addition to the products you need to repair plastic, we also have detailed instructions and tutorials with step-by-step instructions on how to repair plastic.

	Share	New Products	Shopping Cart	Store Directory
1-800-633-3047	Share	International Distributors	Contact Us	Testimonials	About Us

Catalog & Store

How-To...

Step-By-Step

Documents

Newsletters

ATV's & Motorcycles

Bumper Recyclers

Videos

Training

Private Label

Epoxy Fillers

Epoxy fillers are the best way to finish your repair. Here's why...

Epoxy fillers do not "gas-off" like urethane based filler adhesives which can actually bubble up through the paint and ruin your repair.
Epoxy will flex unlike polyester body fillers which will crack when flexed.
Epoxy will not shrink when it cures because it cures chemically.

You can trust your repairs to Urethane Supply Company's epoxy fillers. Our epoxy fillers are used by hundreds of bumper recyclers and body shops everyday.

Epoxy fillers in different hardnesses and sizes to match what your repair

Flex-Filler 2

You can use this flexible filler on both OEM and aftermarket flexible plastic parts. This repair material works on almost any flexible plastic substrate. It will feather nicely in about 15 minutes and can be primed and painted in 30-45 minutes after you apply it. Allow more cure time and use Filler Prep on TPO, TEO, or polypropylene.

Click on image to enlarge

Flex-Filler 2
Part No. 2000-T
10 fl. oz. squeeze tube kit (two 5 fl. oz. tubes)
$24.95

This is most popular for the do-it-yourselfer.

Click on image to enlarge

Flex-Filler 2
Part No. 2000-C
20 fl. oz. squeeze tube kit (two 10 fl. oz. caulking cartridges)
$38.95

This is the most popular epoxy kit for bumper recyclers.

Click on image to enlarge

Flex-Filler 2
Part No. 2000-1
2 gallon kit (two 1 gallon paint cans)
$239.95

For the heavy user.

Click on image to enlarge

Flex-Filler 2
Part No. 2000-2
4 gallon kit (two 2 gallon tubs)
$739.95

Dispense with 6301 Two Gallon Tub Dispenser

SMC Hardset Filler

The SMC Hardset Filler is a two-part epoxy system that is very rigid when fully cured. It works on SMC, Fiberglass, (fibreglass for you Canadians, Brits, and Aussies) polycarbonate, and any other repair application that requires a rigid, high-impact-resistant repair material. It has a working time of 3-4 minutes and will sand in 15 minutes. (Gray)